VW/AUDI 505 00 | Engine Oils
-
Shell Helix Ultra 5W-40As low as €8.60
- for gasoline & diesel
- Shell PurePlus Technology
- for BMW, Mercedes-Benz, VW
-
RAVENOL VSI SAE 5W-40As low as €11.95
- ACEA A3/B4 5W-40 engine oil
- MB 229.3, VW 502 00 / 505 00
- for petrol and diesel engines
-
Shell Helix HX7 10W-40As low as €5.79
- ACEA A3/B4 specification
- fpr Mercedes-Benz, Renault, VW/AUDI
- with active cleaning formulation
-
Shell HELIX HX8 5W-40As low as €7.19
- with specially developed cleaning technology
- VW 502 00 / 505 00 approval
- for Mercedes-Benz, VW / Audi
-
MOBIL 1 FS 0W-40As low as €9.99
- premium engine oil
- for modern and older vehicles
- MB 229.5, VW 502 00 / 505 00 approvals
-
GM Dexos2 Longlife SAE 5W-30As low as €6.88
- high performance oil meeting ACEA C3
- for GM, Mercedes, VW
- meets dexos2 approval
-
Liqui Moly Special Tec LL 5W-30As low as €11.55
- especially for Opel vehicles built before 2010
- BMW, Mercede-Benz, VW approval
- meets API SL, ACEA A3/B4
-
RAVENOL HST SAE 5W-40As low as €10.95
- proven synthetic engine oil
- minimizes friction and wear
- VW 502 00, 505 00, BMW Longlife-01
-
ROWE HIGHTEC SYNT RS DLS SAE 5W-30As low as €9.95
- Prohibits deposits
- Improved cold start conditions
- Reduced oil consumption
-
Rowe Hightec Synt RSI 5W-40As low as €8.55
- HC-Synthese motor oil
- For petrol and diesel engines
- High oxidation protection
-
Rowe Hightec Super Leichtlauf HC-O SAE 10W-40As low as €7.39
- For petrol and diesel engines
- Perfect lubrication
- Prohibits performance issues
-
Rowe Hightec Turbo HD SAE 15W-40As low as €6.25
- For petrol and diesel engines
- Usable for turbo charged engines
- Temperature resistant
-
Liqui Moly Leichtlauf 10W-40As low as €9.29
- For petrol and diesel engines
- Semi-synthetic motor oil
- Reduces the oil consumption
-
Shell Helix Ultra 5W-30As low as €8.49
- with Shell Pure Plus Technology
- BMW LL-01, MB 229.5, VW 502.00 / VW 505.00
- Ferrari Scuderia Technical Partner
-
Liqui Moly Leichtlauf High Tech 5W-40As low as €10.65
- For petrol and diesel engines
- Oil change intervall till 40.000 km
- Reduces oil and fuel consumption
-
Liqui Moly Synthoil High Tech 5W-40As low as €12.29
- For petrol and diesel engines
- Fully syntehtic engine oil
- Reduced fuel and oil consumption
-
Liqui Moly Super Leichtlauf 10W-40As low as €10.59
- For petrol and diesel engines
- Ideal for cars with over 100.000 km
- Excellent wear protection
-
Liqui Moly Top Tec 4100 5W-40As low as €49.70
- For petrol and diesel engines (with or without DPF)
- Excellent wear protection
- Less sulfur for better DPF protection
Huge selection of motor oil from many manufacturers. You have the choice!
Among all lubricants and fuels in the car, engine oil is of particular importance. As the central link between mechanical friction and power generation, the engine oil plays a decisive role in the transmission of power from the engine in the car and is therefore exposed to various loads during each individual journey. If one considers that the intervals between oil changes are sometimes as short as 30,000 km, the importance of engine oil quality becomes even clearer.
Engine oils can essentially be distinguished by their viscosity, their manufacturer's approval or recommendation, and their basic chemical structure. Usually the viscosity is specified in an SAE class. In modern passenger cars, multi-grade engine oils are used which are capable of exhibiting different viscosities in the cold state, such as when the vehicle is cold-started, and in the warm state, i.e. at regular operating temperature up to the maximum load. This is a significant advantage, as an engine oil is thus able to ensure the rapid lubrication of an engine during a cold start with the highest possible flowability, thus guaranteeing qualitative aggregate protection, while at the same time offering a higher viscosity at high operating temperatures in order to be able to maintain a reliable lubricating film under heavy loads. Widely used viscosity grades in cars are SAE 0W-30, 5W-30 and 5W-40, which have replaced the once dominant viscosity 10W-40. An engine oil with a viscosity of 0W-30 is more fluid in comparison to the 5W-30 engine oil when cold and is therefore able to oil the engine more quickly and build up a protective lubricating film more quickly. In addition to the viscosity, automobile manufacturers limit the quality requirements for an engine oil to be used more precisely by specifications or so-called manufacturer's approvals. Common specifications are defined by the manufacturer-independent institutions ACEA (Association des Constructeurs Européens d'Automobiles), the API (American Petroleum Institute) or the ILSAC (International Lubricants Standardization and Approval Committee). Lubricant manufacturers can produce their products according to the classes defined in each case, such as ACEA A3/B4, API SN or ILSAC GF-5, while automotive manufacturers define which specifications must be met for the various vehicles. By specifying an engine oil specification, it is possible to identify in particular whether an engine oil is suitable only for petrol engines or also for vehicles with diesel engines. In the case of requirements for a lubricant individually defined by the vehicle manufacturer, a standardised specification is replaced by the so-called manufacturer approval or operating instructions. An approval is issued directly by the vehicle manufacturer. Oil manufacturers use it to produce products that meet the technical requirements of such an approval. Some of these products are then licensed and officially approved by the car manufacturer (in our online shop, the approvals of an engine oil are listed in the product details under "approvals:") or recommended by the lubricant manufacturer as being suitable for use in vehicles that require an engine oil of the respective operating regulation (in our online shop, these are delimited from the manufacturer releases as "recommendations"). The most popular operating regulations defined by the automobile manufacturers include BMW Longlife-01, Mercedes-Benz MB 229.52, VW 505 00 and 507 00 or GM dexos2. However, there are also various other approvals from the vehicle manufacturers BMW, Mercedes, VW, Ford, Chrysler and many others.
In ATO24's online shop, you will find products from well-known lubricant manufacturers as well as a wide range of OEM products with which car manufacturers sell lubricants under their own brand. Due to our wide range of products we are able to provide the right motor oil for almost every vehicle - at a reasonable price and with short delivery time, no matter if European, American, Asian vehicle, passenger car, SUV, sports car or super sports car.