| Engine Oils
-
Shell Helix Ultra 5W-40As low as €8.60
- for gasoline & diesel
- Shell PurePlus Technology
- for BMW, Mercedes-Benz, VW
-
Mopar MaxPro 5W-20As low as €12.95
- For Chrysler, Jeep , Dodge, Ram and Fiat vehicles
- Meeting the ILSAC GF-5 performance standard
- Approved to Chrysler Material Standard MS-6395
-
RAVENOL VSI SAE 5W-40As low as €12.49 As low as €0.00
- ACEA A3/B4 5W-40 engine oil
- MB 229.3, VW 502 00 / 505 00
- for petrol and diesel engines
-
Shell Helix HX7 10W-40As low as €5.79
- ACEA A3/B4 specification
- fpr Mercedes-Benz, Renault, VW/AUDI
- with active cleaning formulation
-
Shell Helix Ultra 5W-30 ECT C3As low as €10.25
- synthetic engine oil
- BMW Longlife 04 and GM dexos2 approval
- for BMW, Chrysler, Mercedes-Benz
-
Toyota Engine Oil SAE 5W-30 Premium Fuel EconomyAs low as €9.49
- Reduces fuel consumption
- Part number: 08880-83388
- Specifications: ACEA C2, API SN
-
Castrol Edge Professional H 5W-30 Honda 1 LSpecial Price €11.49 Regular Price €14.49(€11.49* / 1 L)
- coprodukcion product of Castrol and Honda Motors
- meets ACEA A1/B1, A5/B5, API SN, ILSAC GF-5
- for Honda vehicles
-
Shell HELIX HX8 5W-40As low as €7.19
- with specially developed cleaning technology
- VW 502 00 / 505 00 approval
- for Mercedes-Benz, VW / Audi
-
Mopar MaxPro 10W-30As low as €11.59
- Licensed API Certified Engine Oil ILSAC GF-4
- For vehicles previously requiring oils such as ILSAC GF-3, GF-2, GF-1
- Approved to the Chrysler Material Standard MS-6395
-
MOBIL 1 FS 0W-40As low as €9.99
- premium engine oil
- for modern and older vehicles
- MB 229.5, VW 502 00 / 505 00 approvals
-
Mopar MaxPro 5W-30As low as €10.95
- For Chrysler, Cummins, Detroit DL, Volvo with corresponding approvals
- Recommended for modern low emission diesel engines
- For older engines operation on low or high sulfer fuel
-
Motorcraft 5W-30 Synthetic BlendAs low as €10.49
- Recommended for gasoline-powered Ford, Lincoln, Mercury
- Synthetic-processed based oil with performance additives
- Meets the Ford WSS-M2C961-A1 approval and ILSAC GF-6
-
Motorcraft 5W-20 Synthetic BlendAs low as €11.99
- Premium-quality engine oil made for Ford, Lincoln, Mercury
- Is recommended for gasoline-powered and flex-fueled
- With Ford approval WSS-M2C960-A1 and ILSAC GF-6 spezification
-
GM Dexos2 Longlife SAE 5W-30As low as €6.88
- high performance oil meeting ACEA C3
- for GM, Mercedes, VW
- meets dexos2 approval
Huge selection of motor oil from many manufacturers. You have the choice!
Among all lubricants and fuels in the car, engine oil is of particular importance. As the central link between mechanical friction and power generation, the engine oil plays a decisive role in the transmission of power from the engine in the car and is therefore exposed to various loads during each individual journey. If one considers that the intervals between oil changes are sometimes as short as 30,000 km, the importance of engine oil quality becomes even clearer.
Engine oils can essentially be distinguished by their viscosity, their manufacturer's approval or recommendation, and their basic chemical structure. Usually the viscosity is specified in an SAE class. In modern passenger cars, multi-grade engine oils are used which are capable of exhibiting different viscosities in the cold state, such as when the vehicle is cold-started, and in the warm state, i.e. at regular operating temperature up to the maximum load. This is a significant advantage, as an engine oil is thus able to ensure the rapid lubrication of an engine during a cold start with the highest possible flowability, thus guaranteeing qualitative aggregate protection, while at the same time offering a higher viscosity at high operating temperatures in order to be able to maintain a reliable lubricating film under heavy loads. Widely used viscosity grades in cars are SAE 0W-30, 5W-30 and 5W-40, which have replaced the once dominant viscosity 10W-40. An engine oil with a viscosity of 0W-30 is more fluid in comparison to the 5W-30 engine oil when cold and is therefore able to oil the engine more quickly and build up a protective lubricating film more quickly. In addition to the viscosity, automobile manufacturers limit the quality requirements for an engine oil to be used more precisely by specifications or so-called manufacturer's approvals. Common specifications are defined by the manufacturer-independent institutions ACEA (Association des Constructeurs Européens d'Automobiles), the API (American Petroleum Institute) or the ILSAC (International Lubricants Standardization and Approval Committee). Lubricant manufacturers can produce their products according to the classes defined in each case, such as ACEA A3/B4, API SN or ILSAC GF-5, while automotive manufacturers define which specifications must be met for the various vehicles. By specifying an engine oil specification, it is possible to identify in particular whether an engine oil is suitable only for petrol engines or also for vehicles with diesel engines. In the case of requirements for a lubricant individually defined by the vehicle manufacturer, a standardised specification is replaced by the so-called manufacturer approval or operating instructions. An approval is issued directly by the vehicle manufacturer. Oil manufacturers use it to produce products that meet the technical requirements of such an approval. Some of these products are then licensed and officially approved by the car manufacturer (in our online shop, the approvals of an engine oil are listed in the product details under "approvals:") or recommended by the lubricant manufacturer as being suitable for use in vehicles that require an engine oil of the respective operating regulation (in our online shop, these are delimited from the manufacturer releases as "recommendations"). The most popular operating regulations defined by the automobile manufacturers include BMW Longlife-01, Mercedes-Benz MB 229.52, VW 505 00 and 507 00 or GM dexos2. However, there are also various other approvals from the vehicle manufacturers BMW, Mercedes, VW, Ford, Chrysler and many others.
In ATO24's online shop, you will find products from well-known lubricant manufacturers as well as a wide range of OEM products with which car manufacturers sell lubricants under their own brand. Due to our wide range of products we are able to provide the right motor oil for almost every vehicle - at a reasonable price and with short delivery time, no matter if European, American, Asian vehicle, passenger car, SUV, sports car or super sports car.