Amsoil Motor Oil, ATF, Coolant, etc.

Oilfinder Banner

ATO24 Oilfinder: All Lubricants for your vehicle

-OR-

Oilfinder Banner

Search vehicle by HSN-TSN (GER only)

14 Items

Set Ascending Direction
    • Recommended for KTM, Husqvarna and other dirt bikes
    • Outstanding during racings and deep in the woods
    • Upgrades clunch performance and lifespan
    • For air- or liquid-cooled four-stroke engines
    • Usable in gearboxes and primary chaincases
    • Eg. in Harley-Davidson, KTM, Ducati, BMW
    • Most requested by on- and off-track dirt bike riders
    • E.g. in KTM, Yamaha, Kawasaki, Suzuki, Husqvarna
    • Protects gear, bearing, piston and especially clutch
    • special product for air-cooled V-Twin engines
    • meets JASO MA, API SM, ILSAC GF-4
    • provides best temperature protection with simultaneous reduction of wear
    • Premium oil designed for metric bikes
    • Also in Honda, Yamaha, Kawasaki, Suzuki-Engines
    • Reduces Friction, Heat and Wear
    • For 2-and 4-stroke motorcycle engines
    • Recommended for liquid or air-cooled engines
    • Optimum gear protection under extreme pressure
    • High-End product from the USA
    • especially developed for metric bikes
    • harmonizes performance and wear protection
    • Perfectly for on- and off-track dirt bike riders
    • E.g. in Honda, Yamaha, Kawasaki, Suzuki, Husqvarna
    • Protects gear, bearing, piston and clutch
    • High-end product from the USA
    • specially developed for Metric bikes
    • brings performance and wear protection in harmony
    • Lubrication for air- or liquid-cooled engines
    • In Indian, Victory and other 4-stroke motorcycles
    • Provides Anti-Wear Protection for gears & chains
    • For early-model air-cooled V-Twin engines
    • E.g. in Harley-Davidson, Knucklehead, Panhead, big-bore
    • Excellent lubrication during high engine RPM

14 Items

per page

Buy the right motorcycle engine oil for your machine at low price!

When buying the right engine oil, it basically depends on the same criteria as in the car or in other motor vehicles:

The choice of the right oil is essential. But why is this so?

As in passenger cars, engines are being developed at a rapid pace due to the ever-increasing demand for new performance spheres coupled with requirements for vehicle emission values. The complexity of individual components is increasing and, as a consequence of the rising demands, the combustion engine is becoming more and more technical and precise.

In order to achieve performance and, more importantly, to provide sufficient protection under these conditions, the demands on the lubricants used are also increasing. As a result, motorcycle engine oils are also becoming increasingly differentiated. This is expressed in various specifications, manufacturer approvals and oil manufacturer recommendations.

Motorcycle engine oil - What are the differences?

Also with the motorcycle the question arises with the multiplicity at engine oils on the market and in on-line Shop of ATO24 justifiably after the differences.

Why does this engine oil fit my machine but another not?

Why can I use a certain 10W-40 motorcycle engine oil but should not use another?

We explain you understandably the connections:

Differences in the field of application

First of all, motor oils in the motorcycle must be distinguished according to their field of application. Depending on the use or type of machine, the engine oil is used in a completely different temperature range or under changed external influences. This results in the basic distinction:

 

  • Engine oils for motorcross machines
  • Engine oils for cruisers
  • Engine oils for racing machines

Differentiation according to lubrication system

Furthermore, there are significant differences in the type of engine lubrication. A distinction must be made here between two-stroke engines and four-stroke engines. Thus in motorcycles are found

 

  • 2-stroke engines with mixture lubrication
    Oil is mixed directly with the gasoline before refueling. The engine does not have an independent oil circuit. The gasoline-oil mixture is burned during combustion (lost lubrication).
  • 2-stroke engines with separate lubrication
    The engine is refueled with gasoline in the fuel tank and also has a tank for 2-stroke oil. Just as in the case of mixed lubrication, this is loss lubrication - the oil is therefore also burned as it passes through the engine.
  • 4-stroke engines with their own oil circuit
    Modern 4-stroke engines with their own oil circuit come in various forms, such as wet sump lubrication, dry sump lubrication, etc., but what is the actual difference?

But what exactly is the difference? Can I put a 4-stroke engine oil into a 2-stroke engine?

The clear answer is: This should be avoided! If you use an engine oil for 4-stroke engines in a 2T engine, this will cause the oil mixed with the gasoline to burn with difficulty, since an oil for a 4-stroke engine is optimized to achieve a certain evaporation stability. The long-term consequence will be unclean combustion and resulting deposits in the engine and exhaust tract.

Mineral or synthetic - differences in production and composition

Among the motorcycle engine oils are

 

  • Mineral Engine Oils
    Known as the "archetype" of engine oil. Are derived from petroleum and alloyed with additives. Often mineral engine oils are prescribed and required for older engines in two-wheelers, as synthetic oils cannot be used. As a rule of thumb, the service life in motorcycles is approximately 5000 km or 1 year.

  • Synthetic  Engine Oils
    The basis here is mineral oils, which are synthetically "optimized" by the addition of additives to achieve longer service lives and improved temperature and stability properties, which are a significant improvement not only but especially in air-cooled engines.

Viscosity of motorcycle engine oil

Typical viscosities of motorcycle engine oils are the SAE grades

 

Harley Davidson, for example, relies in most cases on special SAE 20W-50 engine oils that guarantee long-lasting optimal engine lubrication. Suzuki, on the other hand, usually recommends 10W-40 engine oils, and Kawasaki increasingly relies on 5W-40 engine oil. All these oils are relatively more viscous lubricants, as only these can cope with the stresses at high engine temperatures. New passenger car viscosities such as 0W-16 or 0W-20 will not be found in the 2-wheel sector, as these lubricants are too thin and would lead to increased problems such as clutch slippage.

 

Specification and release for motorcycle engine oil

As in the other oils for internal combustion engines, the choice of the right engine oil usually depends not only on the viscosity. In parallel, vehicle manufacturers express the required quality of an oil or the technical requirements for the oil in that additional institutionalized specifications or even manufacturer approvals are made a prerequisite.

Specifications according to the European ACEA (Association des Constructeurs Européens d'Automobiles), the international ISO (International Organization for Standardization) and the American API (American Petroleum Institute) are also used for motorcycles, just as they are for passenger cars. In addition, the Japanese JASO (Japanese Automotive Standard Organization) issues specifications specifically for motorcycles. We explain the JASO specifications briefly and concisely:

 

  • JASO MA / MA1
    for motorcycles with 4-stroke engine and wet clutch
    JASO MA2
  • für Motorräder mit 4-Takt Motoren und gesteigerten Drehmomenten
  • JASO MB
    for motorcycles with 4-stroke engine and dry clutch or separately lubricated transmission
  • JASO FB corresponds to ISO-EGB
    For 2-stroke engines under light operating conditions, mostly mineral engine oil
  • JASO FC corresponds to ISO-EGC
    For 2-stroke engines under medium operating conditions, mostly synthetic oils
  • JASO FD corresponds to ISO-EGD
    For 2-stroke engines under medium operating conditions, mostly low-smoke burning synthetic oils

 

What are the differences between car engine oil and motorcycle engine oil?

Motorcycle oils are clearly distinguishable from car oils. Basically, the differences lie in the following points:

 

  • Automobiles use different oils to lubricate the engine, transmission and rear axle, respectively. Each of these oils is thus adapted to the individual areas. Motorcycles and mopeds are different. Here, one oil is usually responsible for the lubrication of all components. So there is only one oil circuit! Exceptions are chain oil and fork oil.
  • Motorcycle engines run at much higher speeds, about 1.3 times to 2 times higher than passenger cars. Higher speeds also require different properties of the engine oil.
  • Modern passenger car engines are water-cooled. Motorcycle engines are also water-cooled in some cases, but often air-cooled as in older passenger cars. In these cases, the engine oil plays an even more important role in cooling the components.
  • The relationship between engine displacement and power output is different for passenger cars and motorcycles. Motorcycle engines develop higher power with smaller displacement. In 2-wheel engines, the oil can heat up to 160 °C and must nevertheless ensure optimum lubrication.

AMSOIL counts as the founder of synthetic oils. The american lubricants represent quality and innovation like no one else. Because of the synthetic attributes, the Amsoil oils show a better performance and are universal usable. These perfomance indicators do not show many compareabale lubricants. Because of that, the Amsoil lubricants outperform many oil regulars of car and motorbike manufacturer. The most expertise show Amsoil in his car and motorbike oils. For european cars, Amsoil created a special European Car Fomula product series and the Signature Series with increased oil change intervalls. Via the automatic transmission fluids, Amsoil represents his multiple usable products. Because with only two ATFs, Amsoil covers the approvals of most cars. In point of motorbike technology, Amsoil is very famous for his 20W-50 engine oil. The Amsoil 20W-50 is usable as engine oil, transmission fluid and chain lubricant at the same time. It is specially usable for motorbikes from BMW, Harley Davidson, Ducati and KTM. For sure, it is also eligible for all other motorbike with a need of 20W-50 engine oil. Additionally, Amsoil also offers lubricants for extreme sports and the racing sport. With ATO24 you find the only german certified Amsoil distributor. Our product range offers a great selection of Amsoil oils andi s growing up regularly. Although Amsoil i spart of more expensive lubricants, we try to offer these oils for the lowest prices as possible. With success! More and more customers count on Amsoil and use the synthetic oil for cars and motorbikes. That improves the performance of these vehicles from the first time.