5W-40 | Motorbike & Scooter

Oilfinder Banner

ATO24 Oilfinder: All Lubricants for your vehicle

-OR-

Oilfinder Banner

Search vehicle by HSN-TSN (GER only)

5 Items

Set Ascending Direction

5 Items

per page

Buy engine oil for motorcycles/scooters online at ATO24

The essential difference of 2-stroke or 4-stroke engines and the engine of a car is that a motorcycle / scooter often has only one oil. The oil thus not only lubricates the engine or the brakes, but all at once. In addition motorcycles / scooters engines ride at higher speeds. The oil thus reached significantly higher temperatures. Therefore, the 2-stroke and 4-stroke engines require a different oil than a car. Pro motorcycle / scooter, there is a different requirement of the oil. The SAE viscosities are the important index. A typical oil viscosity for the motorcycle / scooter is a SAE 10W-40. A 10W oil is quite fluid. A 20W-50 is also a suitable oil and thicker in consistency as a 10W-40. To choose the right one just look inside the motorcycle / scooter manual.

 

Choose your liters of engine oil

2-stroke or 4-stroke engines require less liters of engine oil, as a car engine. These few liters must also withstand enormous conditions. For this reason, you should use only a high quality oil. With us you get the typical Castrol oil for engines, but also many other top oils. We will advise you about which oil is suitable for your engine and how many liters they need.


What does 5W-40 mean?


The designation 5W-40 indicates the viscosity of your engine oil in a so-called SAE class. Briefly explained, there are two components of the specification: The number before the W stands for the viscosity of the engine oil in winter (index W) or in cold condition. The other index number refers to the fluidity in warm or operating condition.

A 5W-40 and a 5W-30 engine oil therefore have the same flowability at cold start. At operating temperature, a 5W-40 oil is more viscous. In order to be able to evaluate these characteristics for their effect on the protection of the engine, always the individual case is to be lit up.

Buy the right 5W-40 online at ATO24!


With a wide selection of 5W-40 oils, the online store of ATO24 certainly has a suitable 5W-40 engine oil for your car ready. Simply orient yourself to the required specifications or approvals / recommendations, which the manufacturer of your vehicle prescribes. You can find this manufacturer information in your vehicle manual.

Often a 5W-40 engine oil is required in combination with the following releases / recommendations or specifications:

 

5W-40 oil from OEM: Mercedes-Benz, Toyota, Nissan, Volvo and more.


In addition to products from internationally known oil brands, you can also find OEM products from vehicle manufacturers at ATO24. Often, these are also explicitly tailored to the characteristics of the engines of this one manufacturer and / or it is the products with which your vehicle is filled from the factory (so-called first fill). You have the choice:

 


Mix 5W-30 and 5W-40?


In principle, you may mix a 5W-30 and a 5W-40 engine oil - for example, if your engine has too little oil available and you do not have any engine oil in the correct viscosity at hand. In any case, you should make sure that specifications and approvals are adhered to in addition to the viscosity.

In the long run, mixing 5W-30 and 5W-40 engine oil is suboptimal because, depending on the mixing ratio, the actual viscosity of your engine oil will approach the mixed oil.