ILSAC GF-5 | Engine Oils

Oilfinder Banner

ATO24 Oilfinder: All Lubricants for your vehicle

-OR-

Oilfinder Banner

Search vehicle by HSN-TSN (GER only)

Filters()
Shopping Options
Filter
  1. Specifications ILSAC GF-5 Remove This Item
Clear All

Items 1-24 of 31

Page
Set Ascending Direction
    • For Chrysler, Jeep , Dodge, Ram and Fiat vehicles
    • Meeting the ILSAC GF-5 performance standard
    • Approved to Chrysler Material Standard MS-6395
    • Decreases the oil and fuel consumption
    • In use for patrol fueled engines
    • Ford, Chrysler, GM recommendation
    • Licensed API Certified Engine Oil ILSAC GF-4
    • For vehicles previously requiring oils such as ILSAC GF-3, GF-2, GF-1
    • Approved to the Chrysler Material Standard MS-6395
    • For Chrysler, Cummins, Detroit DL, Volvo with corresponding approvals
    • Recommended for modern low emission diesel engines
    • For older engines operation on low or high sulfer fuel
    • Engine oil with synthesis technology
    • suitable for turbocharged gasoline engines
    • with API SERVICE SP as well as Opel GM dexos1® Gen2 approval
    • synthetic engine oil with API SN Plus
    • meets ILSAC GF-5
    • for Ford, Chrysler and Fiat vehicles
    • synthetic low friction engine oil
    • meets GM dexos1
    • for Turbo-GDI and direct injection engines
    • synthetic engine oil for gasoline and diesel engines
    • GM dexos1 Gen 2 recommendation
    • reaches API SN / CF, ILSAC GF-5
    • fully synthetic engine oil, exclusive USVO product
    • recommended for vehicles of manufacturers Opel, GM, Chevrolet, Daewoo and Holden
    • GM dexos1 Gen 2 approval
    • fully synthetic premium USVO product
    • excellent cold start behavior because of low viscosity
    • for BMW, Mercedes-Benz, Volvo
    • synthetic / hydrogen-processed base oils
    • meets ILSAC GF-5 and API SN
    • offers best protection, reduces oil and gas consumption
    • Excellent wear protection
    • Part number: 08880-13206 (1L),08880-13205 (4L)
    • Specifications: API SP & ILSAC GF-6A
    • exclusive USVO product
    • ACEA A1/B1, C5 Low friction engine oil
    • API SN Energy Conserving Specification
    • Applicable in gasoline engines
    • Best possible wear protection
    • Ford, GM, Chrysler recommendation
    • recommended for BMW, Chrysler, GM, Porsche, VW/AUDI, Mercedes
    • suitable for Turbocharged Direct Injection (TDI) Engines
    • Fuel-efficient; has low-SAPS formulation
    • Minimize wear, fuel and oil consumption
    • Appropriate for petrol fueled engines
    • GM, Ford and Chrysler recommendation
    • reduces wear, oil and fuel consumption
    • complies with API SP and ILSAC GF-6a
    • for gasoline and diesel
    • Reduces oil and fuel consumption, minimises wear
    • Ideally suited for petrol engines
    • Chrysler MS-6395 and GM dexos1 Gen 2 recommendation
    • In gasoline fueled vehicles usable
    • Improved engine protection and fuel savings
    • Chrysler MS-6395, GM 4718M,6094M recommendation
    • In use for gasoline engines
    • Fuel economy and lower emissions
    • With Chrysler, Ford and GM recommendation
    • Chrysler, Ford and GM recommendation
    • Suitable for use in gasoline engines
    • Reduces oil, fuel consumption and emissions
    • coproduction oil of Honda Motors and Castrol
    • meets API SN and ILSAC GF-5
    • optimized for use in honda engines

Items 1-24 of 31

Page
per page

Huge selection of motor oil from many manufacturers. You have the choice!

Among all lubricants and fuels in the car, engine oil is of particular importance. As the central link between mechanical friction and power generation, the engine oil plays a decisive role in the transmission of power from the engine in the car and is therefore exposed to various loads during each individual journey. If one considers that the intervals between oil changes are sometimes as short as 30,000 km, the importance of engine oil quality becomes even clearer.

 

Engine oils can essentially be distinguished by their viscosity, their manufacturer's approval or recommendation, and their basic chemical structure. Usually the viscosity is specified in an SAE class. In modern passenger cars, multi-grade engine oils are used which are capable of exhibiting different viscosities in the cold state, such as when the vehicle is cold-started, and in the warm state, i.e. at regular operating temperature up to the maximum load. This is a significant advantage, as an engine oil is thus able to ensure the rapid lubrication of an engine during a cold start with the highest possible flowability, thus guaranteeing qualitative aggregate protection, while at the same time offering a higher viscosity at high operating temperatures in order to be able to maintain a reliable lubricating film under heavy loads. Widely used viscosity grades in cars are SAE 0W-30, 5W-30 and 5W-40, which have replaced the once dominant viscosity 10W-40. An engine oil with a viscosity of 0W-30 is more fluid in comparison to the 5W-30 engine oil when cold and is therefore able to oil the engine more quickly and build up a protective lubricating film more quickly. In addition to the viscosity, automobile manufacturers limit the quality requirements for an engine oil to be used more precisely by specifications or so-called manufacturer's approvals. Common specifications are defined by the manufacturer-independent institutions ACEA (Association des Constructeurs Européens d'Automobiles), the API (American Petroleum Institute) or the ILSAC (International Lubricants Standardization and Approval Committee). Lubricant manufacturers can produce their products according to the classes defined in each case, such as ACEA A3/B4, API SN or ILSAC GF-5, while automotive manufacturers define which specifications must be met for the various vehicles. By specifying an engine oil specification, it is possible to identify in particular whether an engine oil is suitable only for petrol engines or also for vehicles with diesel engines. In the case of requirements for a lubricant individually defined by the vehicle manufacturer, a standardised specification is replaced by the so-called manufacturer approval or operating instructions. An approval is issued directly by the vehicle manufacturer. Oil manufacturers use it to produce products that meet the technical requirements of such an approval. Some of these products are then licensed and officially approved by the car manufacturer (in our online shop, the approvals of an engine oil  are listed in the product details under "approvals:") or recommended by the lubricant manufacturer as being suitable for use in vehicles that require an engine oil of the respective operating regulation (in our online shop, these are delimited from the manufacturer releases as "recommendations"). The most popular operating regulations defined by the automobile manufacturers include BMW Longlife-01, Mercedes-Benz MB 229.52, VW 505 00 and 507 00 or GM dexos2. However, there are also various other approvals from the vehicle manufacturers BMW, Mercedes, VW, Ford, Chrysler and many others.

In ATO24's online shop, you will find products from well-known lubricant manufacturers as well as a wide range of OEM products with which car manufacturers sell lubricants under their own brand. Due to our wide range of products we are able to provide the right motor oil for almost every vehicle - at a reasonable price and with short delivery time, no matter if European, American, Asian vehicle, passenger car, SUV, sports car or super sports car.